FTTH Cable Production Line – Look Into The Ratings..

How well do you know fiber optic cables? If you don’t have plenty of details about the cables here are some facts that you should know about them. Although an Secondary Coating Line is made of glass plus some of its areas require lots of care, a complete fiber is made such that it’s capable of withstand even the most rugged installations. For example, cat 5/5e/6/6A includes a pulling tension of 25 pounds. There are other optics that are designed to withstand over 200 pounds of pulling tension.

Research studies have shown which a fiber optic can withstand higher pulling tension than copper. Furthermore, it’s rated for larger temperature ranges and it is immune to EM/RFI interference.

Fiber Is A Lot More Secure

Since information is carried inside the cable, the details are more secure when compared to other cables; therefore, it’s difficult to hack the details. While it’s challenging to hack the data within the cables, it doesn’t imply that they can’t be hacked. It is because all you need to do is to get the network tap and physical accessibility cable and it is possible to hack it.

It’s Easy to Install The Cable

While the cable was hard to install not too long ago, things have changed now as technologies have changed. In order to install the cable you just need to contact installation professionals and the cable will be installed in a very short time.

The Cables Aren’t Afflicted With Environmental Conditions

Because the fibers carry light, they aren’t disturbed by changes in temperature, cold, rain or other environmental condition. This may not be the truth with copper cables which are usually affected by environmental conditions. For instance, when it’s cold, the cables transmit data considerably faster than when it’s hot.

They Support Wireless

The cables are heavily employed by telecommunication companies to hold wireless telephone signals from the towers to the central network. The fibers are desirable to most companies because of their large bandwidth and long lasting compatibility with all the network equipment.

The same as copper cables, NEC (National Electrical Code) requires Optical Fiber Coloring Machine be marked making use of their fire and smoking ratings. NEC requires all indoor fiber cables be marked correctly and installed properly for the intended use. Based on NEC, a building’s inside area is divided into three types of sections: plenums, risers and general purpose areas.

A Plenum area is a building space employed for air flow or air distribution system. In most buildings, the location above a drop ceiling or under a raised floor is used because the air return (supply of air) for the air conditioning. Those drop ceiling and raised floors are also where fiber cables tend to be installed. If those cables were burning, they might emit toxic fumes and also the fumes would be fed to the rest of the building by the air conditioning unit. As a result, people may be injured though they are quite a distance from your fire.


These are the facts that you need to learn about optic cables. When buying the units you need to make sure that you purchase them from authorized dealers. After buying them you need to make certain you set them up professionally. If you don’t have the skills you ought to hire a skilled professional to set up them to suit your needs. We manufacture different eygmcn of optic fiber cable equipment including Optical cable sheathing line and lots of other equipment. Visit the given links to know much more about us.

When performing fusion splicing you will need a Fusion Splicer, fusion splice protection sleeves, and isopropyl alcohol and stripping tools. If you use a mechanical splice, you will require stripping tools, mechanical splices, isopropyl alcohol along with a mechanical splice assembly tool. When hand terminating a fiber you will need 99% isopropyl alcohol, epoxy/adhesive, a syringe and needle, polishing (lapping) film, a polishing pad, a polishing puck, a crimp tool, stripping tools, fiber optic connectors ( or splice on connectors) and piano wire.

Whenever a termination is complete you have to inspect the end face in the connector with Optical Fiber Ribbon Machine. Being sure that light is getting through either the splice or even the connection, a Visual Fault Locator can be used. This item of equipment will shoot a visible laser on the fiber cable so that you can tell that there are no breaks or faulty splices. In the event the laser light stops down the fiber somewhere, there is most likely an escape in the glass when this occurs. When there is more than a dull light showing at the connector point, the termination had not been successful. The light must also go through the fusion splice, when it fails to, stop and re- splice or re-terminate.

Leave a Reply

Your email address will not be published. Required fields are marked *